https://youtu.be/tUBEj8FFloY
Often, simply by changing the ink cartridge For rubber stamps, you can reuse them as if they were new, ensuring many more impressions for a longer period of time. But is it an easy task or does it require some skill? Continue reading this article and you will see how in just a few minutes your Trodat rubber stamps They are back in operation.
How to change the ink pad of the Trodat rubber stamps?
With 5 simple steps, you can replace the rubber seal pad and start printing again. It only takes 2 minutes!
Important information:
- The ink pad is located on the back of the printing area.
- On the sides of the stamp, there are cone-shaped buttons that hold the seal in place.
- On the front there is a small button, which ejects the ink pad.
Step 1
Hold the rubber seal with the rear facing you, press the seal down slightly until the bottom line of the stamp connects with the top line of the ink pad. Press the buttons on both sides of the Trodat rubber seal to lock the seal in place.
Step 2
Use the tip of your finger and push the button on the front of the rubber seal to release the ink pad outwards. You may need to shake the seal slightly to fully release the pad without any problems.
Step 3
Remove the ink pad from its slot. Adjust it to one side for removal.
Step 4
Now, insert the new ink pad. This should be inserted facing downwards. You will hear a “click” when you are in place.
Step 5
Make sure that it works smoothly, that nothing is stuck or out of place.
That's all! Changing the ink pad on Trodat stamps was very easy, wasn't it?
Currently, there are no problems finding ink cartridges for rubber stamps. In fact, at Sellos-Caucho.com you will find a wide variety of rubber stamp pads in a multitude of different colors. The effects can be amazing!! Years ago, there were hardly any color varieties, but the evolution achieved in the manufacture of rubber stamps has allowed the launch of a wider range of accessories to achieve the maximum functionality of this item.
Thanks for the post. It really helped me a lot. Although the system for changing the pad on my Trodat stamp is very simple, I had some doubts because I had never done it before. Now my stamp prints like on the first day!
Thank you Antonio. We are at your disposal for whatever you need.